- #Dell studio one 1909 screen has pink tint how to
- #Dell studio one 1909 screen has pink tint upgrade
The screen has a processor and RAM in it as well, which translates the signal sent over the video cable into signals sent to the screen to draw the image. The other possibility is a failure in the screen's hardware. Since an external monitor works, the GPU is fine. And there's no guarantee this is the problem either (though at $6 it's probably worth the risk). You'll need to disassemble both halves of the laptop to be able to reach everywhere. Https /Installing the new cable is not for the faint of heart though. Looks like replacement cables for that model laptop are still available on eBay. But it's also possible for it to fail at the connector to the GPU or the screen. Failure at the hinge between the lower and upper halves of the laptop is most common. It's not uncommon in older laptops since the cable is twisted 90 degrees every time you open or close the lid. That looks like the internal video cable connecting the laptop's GPU (located on the motherboard) to the screen is failing.
#Dell studio one 1909 screen has pink tint how to
Once I show people how to do this, they tell me they love the extra desktop space they gain from this. The money spent on an external monitor won't be wasted with a new laptop, as you should also be able to connect the new laptop to it to extend your desktop. As for postponing buying a new laptop, try to see if you can get an external monitor set up at the places where you normally use the laptop (usually home and work). Clean out any debris which may have gotten wedged in there causing an intermittent connection. One last thing I'd try is to remove the video cable, take a can of compressed air, and try blasting the inside of the connector on the motherboard. 7 years is a pretty good run for a laptop. But at some point you have to give up on old tech.
#Dell studio one 1909 screen has pink tint upgrade
The specs are still plenty good (I still haven't started recommending people upgrade from Sandy Bridge systems, and my home server has a Sandy Bridge CPU). The laptop is old enough it probably isn't worth repairing. Another possibility is something is out of spec with the motherboard/GPU and is slowly destroying your laptop screens. But as the screen aged and became less tolerant, the image started to degrade.
The signal tolerances were probably close enough to within spec that a new screen originally worked. Since you say the screen has suffered similar problems before multiple times, my guess would be that it's a manufacturing defect in the original motherboard which is degrading the signal. If the cable didn't help, then the problem is either the screen, or the connector (somewhere between the GPU to where the cable connects to it).